Aztek, Rendezvous 2001-2005

Camshaft Position Sensor

Print

Removal & Installation



3.4L Engine
  1. Turn OFF the ignition.
  2.  
  3. Remove the serpentine drive belt.
  4.  
  5. Disconnect the sensor electrical connector.
  6.  
  7. Remove the power steering pump, if required.
  8.  
  9. Remove the attaching bolt.
  10.  
  11. Remove the sensor.
  12.  
  13. Inspect the sensor for wear, cracks or leakage if the sensor is not being replaced.
  14.  

To install:

  1. Lubricate the O-ring with clean engine oil and replace if damaged.
  2.  
  3. Install the camshaft Position Sensor.
  4.  
  5. Tighten the retaining bolt to 8 ft. lbs. (10 Nm).
  6.  
  7. Connect the sensor electrical connector.
  8.  
  9. Install the power steering pump, if removed.
  10.  
  11. Reinstall the serpentine drive belt.
  12.  

 
label.common.footer.alt.autozoneLogo