Aztek, Rendezvous 2001-2005

Control Links

Print

Removal & Installation



  1. Raise and support the vehicle.
  2.  
  3. Remove the stabilizer shaft link bolt and nut.
  4.  
  5. Use a pry bar in order to remove the stabilizer shaft link insulators and the spacer.
  6.  

To install:

  1. Use a pry bar in order to install the stabilizer shaft link insulators and the spacer
  2.  
  3. Install the stabilizer shaft link and insulators.
  4.  
  5. Install the stabilizer shaft link bolt and nut and tighten nut to 13 ft. lbs. (18 Nm).
  6.  
  7. Lower the vehicle.
  8.  

 
label.common.footer.alt.autozoneLogo