Aztek, Rendezvous 2001-2005

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Drain the cooling system.
  4.  
  5. Remove or disconnect the following:

    Wiper module
     
    Brake booster vacuum hose
     
    Air cleaner cover and intake tube
     
    Throttle and cruise control cables, from the TBI bracket, also
     
    Transmission filler tube
     
    Hoses from the heater core
     
    Right and left instrument panel insulators
     
    Center floor air outlet
     
    Heater outlet duct
     
    Tie strap holding the instrument panel harness to the heater core cover
     
    Heater core cover
     
    Heater core retaining screw
     
    Heater core
     

  6.  

To install:

  1. Install or connect the following:

    Heater core
     
    Heater core retaining screw. Torque to 8 inch lbs.
     
    Heater core cover. Torque to 8 inch lbs.
     
    Heater outlet duct. Torque to 8 inch lbs.
     
    Tie strap holding the instrument panel harness to the heater core cover
     
    Center floor air outlet
     
    Right and left instrument panel insulators
     
    Hoses to the heater core
     
    Transmission filler tube
     
    Throttle and cruise control cables
     
    Air cleaner cover and intake tube
     
    Brake booster vacuum hose
     
    Wiper module
     

  2.  

 
label.common.footer.alt.autozoneLogo