BMW 318/325/M3/525/535/M5 1989-1993 Repair Information

Ignition Switch

Print

REMOVAL & INSTALLATION



  1. Disconnect the negative battery terminal. Disarm the SRS when working on the steering column, if equipped.
  2.  
  3. Remove the steering wheel, the trim panel below the steering column and the steering column lower casing.
  4.  
  5. Disconnect the ignition switch harness and press the clips in securing the switch. Pull the switch off the lock assembly.
  6.  
  7. Check the position of the switch and install in reverse order.
  8.  

 
label.common.footer.alt.autozoneLogo