BMW 318/325/M3/525/535/M5 1989-1993 Repair Information

Turn Signal Switch

Print

REMOVAL & INSTALLATION



E30 3 Series
  1. Disconnect the negative battery terminal. Remove the steering wheel.
  2.  
  3. Remove the trim panel at the bottom left of the instrument panel and the lower steering column casing.
  4.  
  5. Remove the screws holding the switch. Remove the switch and disconnect the plug.
  6.  

To install:
  1. Install the switch and connect the plug. The ground wire must be connected and the retainers must fit into the holes.
  2.  
  3. Install the trim panels and steering wheel. Connect the negative battery terminal.
  4.  

E36 3 Series
  1. Remove the lower dashboard trim panel at the left. Remove the lower section of the steering column casing.
  2.  
  3. Remove the steering wheel. Remove the screw and compress the clip to release the switch. Disconnect the plug.
  4.  
  5. Install the switch and connect the plug. Install the steering wheel and trim panels.
  6.  

E34 5 Series
  1. Remove the lower dashboard trim panel at the left. Remove the lower section of the steering column casing.
  2.  
  3. Remove the steering wheel and compress the clip to release the switch. Disconnect the plug.
  4.  
  5. Install the switch and connect the plug. Install the steering wheel and trim panels.
  6.  

 
label.common.footer.alt.autozoneLogo