BMW Cars 1999-06

Extension Housing Gasket/Seal

Print

Removal & Installation



  1. Disconnect the driveshaft from the output flange and support with wire.
  2.  
  3. Counterhold the output flange and remove the nut. Pull off the output flange.
  4.  
  5. Use a seal puller to remove the seal.
  6.  
  7. Install the new seal with the lip facing in. Use a seal driver to install.
  8.  
  9. Install the output flange and torque the nut to 72 ft. lbs. (100 Nm). Install the driveshaft.
  10.  

 
label.common.footer.alt.autozoneLogo