BMW Cars 1999-06

Vehicle Speed Sensor

Print

Removal & Installation



  1. Remove the transmission.
  2.  
  3. Remove the screw that holds the speed sensor in place.
  4.  
  5. Pull out the sensor.
  6.  
  7. Disconnect the wire harness from the holder

    Click image to see an enlarged view

    Fig. The screw (2) location for speed sensor (3)

  8.  

To install:

  1. Lubricate the o-ring lightly with grease.

    Click image to see an enlarged view

    Fig. Lubricate the o-ring (3) lightly with grease

  2.  
  3. Replace the sensor and tighten down the screw.
  4.  

  1. Remove the transmission.
  2.  
  3. Remove the screw that holds the speed sensor in place.
  4.  
  5. Pull out the sensor.
  6.  
  7. Disconnect the wire harness from the holder

    Click image to see an enlarged view

    Fig. The screw (2) location for speed sensor (3)

  8.  

To install:

  1. Lubricate the o-ring lightly with grease.

    Click image to see an enlarged view

    Fig. Lubricate the o-ring (3) lightly with grease

  2.  
  3. Replace the sensor and tighten down the screw.
  4.  

  1. Remove the transmission.
  2.  
  3. Remove the screw that holds the speed sensor in place.
  4.  
  5. Pull out the sensor.
  6.  
  7. Disconnect the wire harness from the holder

    Click image to see an enlarged view

    Fig. The screw (2) location for speed sensor (3)

  8.  

To install:

  1. Lubricate the o-ring lightly with grease.

    Click image to see an enlarged view

    Fig. Lubricate the o-ring (3) lightly with grease

  2.  
  3. Replace the sensor and tighten down the screw.
  4.  

  1. Remove the transmission.
  2.  
  3. Remove the screw that holds the speed sensor in place.
  4.  
  5. Pull out the sensor.
  6.  
  7. Disconnect the wire harness from the holder

    Click image to see an enlarged view

    Fig. The screw (2) location for speed sensor (3)

  8.  

To install:

  1. Lubricate the o-ring lightly with grease.

    Click image to see an enlarged view

    Fig. Lubricate the o-ring (3) lightly with grease

  2.  
  3. Replace the sensor and tighten down the screw.
  4.  

2.8L (M52) And 3.2L (S52) Engines
  1. Remove the transmission.
  2.  
  3. Remove the screw that holds the speed sensor in place.
  4.  
  5. Pull out the sensor.
  6.  
  7. Disconnect the wire harness from the holder

    Click image to see an enlarged view

    Fig. The screw (2) location for speed sensor (3)

  8.  

To install:

  1. Lubricate the o-ring lightly with grease.

    Click image to see an enlarged view

    Fig. Lubricate the o-ring (3) lightly with grease

  2.  
  3. Replace the sensor and tighten down the screw.
  4.  

2.8L (M52) Engines
  1. Remove the transmission.
  2.  
  3. Remove the screw that holds the speed sensor in place.
  4.  
  5. Pull out the sensor.
  6.  
  7. Disconnect the wire harness from the holder

    Click image to see an enlarged view

    Fig. The screw (2) location for speed sensor (3)

  8.  

To install:

  1. Lubricate the o-ring lightly with grease.

    Click image to see an enlarged view

    Fig. Lubricate the o-ring (3) lightly with grease

  2.  
  3. Replace the sensor and tighten down the screw.
  4.  

3.2L (S52) Engines
  1. Remove the transmission.
  2.  
  3. Remove the screw that holds the speed sensor in place.
  4.  
  5. Pull out the sensor.
  6.  
  7. Disconnect the wire harness from the holder

    Click image to see an enlarged view

    Fig. The screw (2) location for speed sensor (3)

  8.  

To install:

  1. Lubricate the o-ring lightly with grease.

    Click image to see an enlarged view

    Fig. Lubricate the o-ring (3) lightly with grease

  2.  
  3. Replace the sensor and tighten down the screw.
  4.  

 
label.common.footer.alt.autozoneLogo