BMW Cars 1999-06

2.5L L6 - Auto 7

Print

Trouble Code: P2097



Post Catalyst Fuel Trim System Too Rich (Bank 1)

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 

Trouble Code: P2098



Post Catalyst Fuel Trim System Too Lean (Bank 2)

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 

Trouble Code: P2122



Accelerator Pedal Position Sensor -D- Circuit Low Input

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor has failed
 
Throttle position sensor wiring may have shorted
 
Throttle position sensor has failed
 
Faulty voltage supply
 

Trouble Code: P2123



Accelerator Pedal Position Sensor -D- Circuit High Input

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor has failed
 
Throttle position sensor wiring may have shorted
 
Throttle position sensor has failed
 
Faulty voltage supply
 

Trouble Code: P2127



Accelerator Pedal Position Sensor -E- Circuit Low Input

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor has failed
 
Throttle position sensor wiring may have shorted
 
Throttle position sensor has failed
 
Faulty voltage supply
 

Trouble Code: P2128



Accelerator Pedal Position Sensor -E- Circuit High Input

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor has failed
 
Throttle position sensor wiring may have shorted
 
Throttle position sensor has failed
 
Faulty voltage supply
 

Trouble Code: P2138



Throttle Position Sensor D/E Voltage Correlation

Possible Causes:



ETC TP sensor connector is damaged or shorted
 
ETC TP sensor circuits shorted together in the wire harness
 
ETC TP sensor signal circuit is shorted to VREF (5v)
 
ETC TP sensor is damaged or the DME has failed
 

Trouble Code: P2195



O2 Sensor Signal Stuck Lean Bank 1 Sensor 1

Possible Causes:



Engine oil level high
 
Camshaft timing error
 
Cylinder compression low
 
Exhaust leaks in front of O2S
 
EGR valve is stuck open
 
EGR gasket is leaking
 
EVR diaphragm is leaking
 
Damaged fuel pressure regulator or extremely low fuel pressure
 
O2S circuit is open or shorted in the wiring harness
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Air leaks after the MAF sensor
 
PCV system leaks
 
Dip stick not seated properly
 

Trouble Code: P2196



O2 Sensor Signal Stuck Rich Bank 1 Sensor 1

Possible Causes:



Engine oil level high
 
Camshaft timing error
 
Cylinder compression low
 
Exhaust leaks in front of O2S
 
EGR valve is stuck open
 
EGR gasket is leaking
 
EVR diaphragm is leaking
 
Damaged fuel pressure regulator or extremely low fuel pressure
 
O2S circuit is open or shorted in the wiring harness
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Air leaks after the MAF sensor
 
PCV system leaks
 
Dip stick not seated properly
 

Trouble Code: P2197



O2 Sensor Signal Stuck Lean Bank 2 Sensor 1

Possible Causes:



Engine oil level high
 
Camshaft timing error
 
Cylinder compression low
 
Exhaust leaks in front of O2S
 
EGR valve is stuck open
 
EGR gasket is leaking
 
EVR diaphragm is leaking
 
Damaged fuel pressure regulator or extremely low fuel pressure
 
O2S circuit is open or shorted in the wiring harness
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Air leaks after the MAF sensor
 
PCV system leaks
 
Dip stick not seated properly
 

Trouble Code: P2198



O2 Sensor Signal Stuck Rich Bank 2 Sensor 1

Possible Causes:



Engine oil level high
 
Camshaft timing error
 
Cylinder compression low
 
Exhaust leaks in front of O2S
 
EGR valve is stuck open
 
EGR gasket is leaking
 
EVR diaphragm is leaking
 
Damaged fuel pressure regulator or extremely low fuel pressure
 
O2S circuit is open or shorted in the wiring harness
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Air leaks after the MAF sensor
 
PCV system leaks
 
Dip stick not seated properly
 

Trouble Code: P2227



Barometric Circuit Rationality Check

Possible Causes:



Sensor has deteriorated (response time too slow) or has failed
 
MAP sensor signal circuit is shorted to ground
 
MAP sensor circuit (5v) is open
 
MAP sensor is damaged or it has failed
 
BARO sensor signal circuit is shorted to ground
 
BARO sensor circuit (5v) is open
 
BARO sensor is damaged or it has failed
 
Replace the DME
 

Trouble Code: P2228



Barometric Circuit Low

Possible Causes:



Sensor has deteriorated (response time too slow) or has failed
 
MAP sensor signal circuit is shorted to ground
 
MAP sensor circuit (5v) is open
 
MAP sensor is damaged or it has failed
 
BARO sensor signal circuit is shorted to ground
 
BARO sensor circuit (5v) is open
 
BARO sensor is damaged or it has failed
 
Replace the DME
 

Trouble Code: P2229



Barometric Circuit High

Possible Causes:



Sensor has deteriorated (response time too slow) or has failed
 
MAP sensor signal circuit is shorted to ground
 
MAP sensor circuit (5v) is open
 
MAP sensor is damaged or it has failed
 
BARO sensor signal circuit is shorted to ground
 
BARO sensor circuit (5v) is open
 
BARO sensor is damaged or it has failed
 
Replace the DME
 

Trouble Code: P2231



O2 Sensor Signal Circuit Shorted to Heater Circuit Bank 1 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 

Trouble Code: P2234



O2 Sensor Signal Circuit Shorted to Heater Circuit Bank 2 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 

Trouble Code: P2237



O2S Sensor Positive Current Control Circuit/Open Circuit (Bank 1 Sensor 1)

Possible Causes:



Check plugs
 
Check wiring harness
 
Replace sensor
 

Trouble Code: P2240



O2S Sensor Positive Current Control Circuit/Open Circuit (Bank 2 Sensor 1)

Possible Causes:



Check plugs
 
Check wiring harness
 
Replace sensor
 

Trouble Code: P2243



O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 

Trouble Code: P2247



O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 

Trouble Code: P2251



O2 Sensor Negative Voltage Circuit/Open Bank 1 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 

Trouble Code: P2254



O2 Sensor Negative Voltage Circuit/Open Bank 2 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 

Trouble Code: P2400



EVAP Leak Detection Pump (LDP) Control Circuit Open

Possible Causes:



EVAP LDP power supply circuit is open
 
EVAP LDP solenoid valve is damaged or it has failed
 
EVAP LDP canister has a leak or a poor seal
 
EVAP canister system has an improper seal
 
Evaporative Emission (EVAP) canister purge regulator valve 1 has failed
 
Leak Detection Pump (LDP) is faulty
 
Aftermarket EVAP parts that do not conform to specifications
 
EVAP component seals leaking (i.e., leaks in the Purge valve, fuel tank pressure sensor, canister vent solenoid, fuel vapor control valve tube assembly or fuel vapor vent valve).
 

Trouble Code: P2401



EVAP Leak Detection Pump Control Circuit Low

Possible Causes:



EVAP LDP power supply circuit is open
 
EVAP LDP solenoid valve is damaged or it has failed
 
EVAP LDP canister has a leak or a poor seal
 
EVAP canister system has an improper seal
 
Evaporative Emission (EVAP) canister purge regulator valve 1 has failed
 
Leak Detection Pump (LDP) is faulty
 
Aftermarket EVAP parts that do not conform to specifications
 
EVAP component seals leaking (i.e., leaks in the Purge valve, fuel tank pressure sensor, canister vent solenoid, fuel vapor control valve tube assembly or fuel vapor vent valve).
 

Trouble Code: P2402



EVAP Leak Detection Pump Control Circuit High

Possible Causes:



EVAP LDP power supply circuit is open
 
EVAP LDP solenoid valve is damaged or it has failed
 
EVAP LDP canister has a leak or a poor seal
 
EVAP canister system has an improper seal
 
Evaporative Emission (EVAP) canister purge regulator valve 1 has failed
 
Leak Detection Pump (LDP) is faulty
 
Aftermarket EVAP parts that do not conform to specifications
 
EVAP component seals leaking (i.e., leaks in the Purge valve, fuel tank pressure sensor, canister vent solenoid, fuel vapor control valve tube assembly or fuel vapor vent valve).
 

Trouble Code: P2414



O2 Sensor Exhaust Sample Error Bank 1 Sensor 1

Possible Causes:



Intake Manifold Runner Position Sensor is damaged or has failed
 
Intake system has leaks (false air)
 
Motor for intake flap is faulty
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 

Trouble Code: P2415



O2 Sensor Exhaust Sample Error Bank 2 Sensor 1

Possible Causes:



Intake Manifold Runner Position Sensor is damaged or has failed
 
Intake system has leaks (false air)
 
Motor for intake flap is faulty
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 

Trouble Code: P2418



Evaporative Emission System Switching Valve Control Circuit Open

Possible Causes:



EVAP power supply circuit is open
 
EVAP solenoid control circuit is open or shorted to ground
 
EVAP solenoid control circuit is shorted to power (B+)
 
EVAP solenoid valve is damaged or it has failed
 
EVAP canister purge solenoid valve is faulty
 

Trouble Code: P2419



Evaporative Emission System Switching Valve Control Circuit Low

Possible Causes:



EVAP power supply circuit is open
 
EVAP solenoid control circuit is open or shorted to ground
 
EVAP solenoid control circuit is shorted to power (B+)
 
EVAP solenoid valve is damaged or it has failed
 
EVAP canister purge solenoid valve is faulty
 

Trouble Code: P2420



Evaporative Emission System Switching Valve Control Circuit High

Possible Causes:



EVAP power supply circuit is open
 
EVAP solenoid control circuit is open or shorted to ground
 
EVAP solenoid control circuit is shorted to power (B+)
 
EVAP solenoid valve is damaged or it has failed
 
EVAP canister purge solenoid valve is faulty
 

Trouble Code: P2430



Secondary Air Mass Flow Sensor Rationality Check

Possible Causes:



EVAP power supply circuit is open
 
EVAP solenoid control circuit is open or shorted to ground
 
EVAP solenoid control circuit is shorted to power (B+)
 
EVAP solenoid valve is damaged or it has failed
 
EVAP canister purge solenoid valve is faulty
 

Trouble Code: P2540



Secondary Air System Vent Valve Stuck Closed

Possible Causes:



EVAP power supply circuit is open
 
EVAP solenoid control circuit is open or shorted to ground
 
EVAP solenoid control circuit is shorted to power (B+)
 
EVAP solenoid valve is damaged or it has failed
 
EVAP canister purge solenoid valve is faulty
 

Trouble Code: P2626



O2 Sensor Pumping Current Trim Circuit/Open Bank 1 Sensor 1

Possible Causes:



Check activation of Recirculation Pump Relay
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 

Trouble Code: P2629



O2 Sensor Pumping Current Trim Circuit/Open Bank 2 Sensor 1

Possible Causes:



Check activation of Recirculation Pump Relay
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 

Trouble Code: P2713



Pressure Regulator Valve 4 Plausibility

Possible Causes:



Pressure control solenoid circuit is shorting to ground
 
Pressure control solenoid circuit is open
 
Valve has failed
 
TCM has failed
 

Trouble Code: P2716



Pressure Control Solenoid 4 Electrical Malfunction

Possible Causes:



ATF level is low
 
Circuit harness connector contacts are corroded or ingresses of water
 
Circuit wires have shorted to each other, to battery or ground
 
Automatic Transmission Hydraulic Pressure Sensor 1 has failed
 
Solenoid valves in valve body are faulty
 
Transmission Control Module (TCM) needs replacing
 
Transmission Input Speed (RPM) Sensor has failed
 
Transmission Output Speed (RPM) Sensor has failed
 

Trouble Code: P2720



Pressure Regulator Valve 4 Lower Threshold

Possible Causes:



Pressure control solenoid circuit is shorting to ground
 
Pressure control solenoid circuit is open
 
Valve has failed
 
TCM has failed
 

Trouble Code: P2721



Pressure Regulator Valve 4 Upper Threshold

Possible Causes:



Pressure control solenoid circuit is shorting to ground
 
Pressure control solenoid circuit is open
 
Valve has failed
 
TCM has failed
 

Trouble Code: P2722



Pressure Regulator Valve 5 Plausibility

Possible Causes:



Pressure control solenoid circuit is shorting to ground
 
Pressure control solenoid circuit is open
 
Valve has failed
 
TCM has failed
 

Trouble Code: P2725



Pressure Regulator Valve 5 No Signal

Possible Causes:



Pressure control solenoid circuit is shorting to ground
 
Pressure control solenoid circuit is open
 
Valve has failed
 
TCM has failed
 

 
label.common.footer.alt.autozoneLogo