BMW Cars 1999-06

3.0L L6 - Auto 13

Print

Trouble Code: P2098



Post Catalyst Fuel Trim System Too Lean (Bank 2)

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 

Trouble Code: P2099



Post Catalyst Fuel Trim System Too Rich (Bank 2)

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 

Trouble Code: P2100



Throttle Actuator -A- Control Motor Circuit Open

Possible Causes:



TACM wiring harness connector is damaged or open
 
TACM wiring may be crossed in the wire harness assembly
 
TACM (motor) circuit is open, or TACM assembly is damaged (possible open circuit)
 
TACM or the Throttle Valve is dirty
 
Throttle Position sensor has failed
 
Heater defective
 

Trouble Code: P2102



Throttle Actuator -A- Control Motor Circuit Low

Possible Causes:



TACM wiring harness connector is damaged or open
 
TACM wiring may be crossed in the wire harness assembly
 
TACM (motor) circuit is open, or TACM assembly is damaged (possible open circuit)
 
TACM or the Throttle Valve is dirty
 
Throttle Position sensor has failed
 
Heater defective
 

Trouble Code: P2103



Throttle Actuator -A- Control Motor Circuit High

Possible Causes:



TACM wiring harness connector is damaged or open
 
TACM wiring may be crossed in the wire harness assembly
 
TACM (motor) circuit is open, or TACM assembly is damaged (possible open circuit)
 
TACM or the Throttle Valve is dirty
 
Throttle Position sensor has failed
 
Heater defective
 

Trouble Code: P2122



Accelerator Pedal Position Sensor -D- Circuit Low Input

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor has failed
 
Throttle position sensor wiring may have shorted
 
Throttle position sensor has failed
 
Faulty voltage supply
 

Trouble Code: P2123



Accelerator Pedal Position Sensor -D- Circuit High Input

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor has failed
 
Throttle position sensor wiring may have shorted
 
Throttle position sensor has failed
 
Faulty voltage supply
 

Trouble Code: P2127



Accelerator Pedal Position Sensor -E- Circuit Low Input

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor has failed
 
Throttle position sensor wiring may have shorted
 
Throttle position sensor has failed
 
Faulty voltage supply
 

Trouble Code: P2128



Accelerator Pedal Position Sensor -E- Circuit High Input

Possible Causes:



Ground between engine and chassis may be broken
 
Throttle position sensor may have failed
 
Accelerator Pedal Position Sensor has failed
 
Throttle position sensor wiring may have shorted
 
Throttle position sensor has failed
 
Faulty voltage supply
 

Trouble Code: P2138



Throttle Position Sensor D/E Voltage Correlation

Possible Causes:



ETC TP sensor connector is damaged or shorted
 
ETC TP sensor circuits shorted together in the wire harness
 
ETC TP sensor signal circuit is shorted to VREF (5v)
 
ETC TP sensor is damaged or the DME has failed
 

Trouble Code: P2177



System Too Lean Off Idle Bank 1

Possible Causes:



Intake Manifold Runner Position Sensor has failed
 
Intake system has leaks (false air)
 
Motor for intake flap is faulty
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 
Fuel Injector(s) may have failed
 

Trouble Code: P2178



System Too Rich Off Idle Bank 1

Possible Causes:



Intake Manifold Runner Position Sensor has failed
 
Intake system has leaks (false air)
 
Motor for intake flap is faulty
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 
Fuel Injector(s) may have failed
 

Trouble Code: P2179



System Too Lean Off Idle Bank 2

Possible Causes:



Intake Manifold Runner Position Sensor has failed
 
Intake system has leaks (false air)
 
Motor for intake flap is faulty
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 
Fuel Injector(s) may have failed
 

Trouble Code: P2180



System Too Rich Off Idle Bank 2

Possible Causes:



Intake Manifold Runner Position Sensor has failed
 
Intake system has leaks (false air)
 
Motor for intake flap is faulty
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 
Fuel Injector(s) may have failed
 

Trouble Code: P2183



ECT Sensor Signal Range/Performance Rationality

Possible Causes:



Check for low coolant level or incorrect coolant mixture
 
DME detects a short circuit wiring in the ECT
 
CHT sensor is out-of-calibration or it has failed
 
ECT sensor is out-of-calibration or it has failed
 

Trouble Code: P2184



ECT Sensor 2 Circuit Range Check (Minimum)

Possible Causes:



ECT sensor signal circuit is grounded in the wiring harness
 
ECT sensor doesn-t react to changes in temperature
 
ECT sensor is damaged or the DME has failed
 

Trouble Code: P2185



ECT Sensor 2 Circuit Range Check (Maximum)

Possible Causes:



ECT sensor signal circuit is grounded in the wiring harness
 
ECT sensor doesn-t react to changes in temperature
 
ECT sensor is damaged or the DME has failed
 

Trouble Code: P2186



ECT Sensor 2 Circuit High Input

Possible Causes:



ECT sensor signal circuit is open (inspect wiring & connector)
 
ECT sensor signal circuit is shorted to ground
 
ECT sensor is damaged or it has failed
 

Trouble Code: P2187



System Too Lean at Idle Bank 1

Possible Causes:



Evaporative Emission (EVAP) canister purge regulator valve is faulty
 
Exhaust system components are damaged
 
Fuel injectors are faulty
 
Fuel pressure regulator and residual pressure have failed
 
Fuel Pump (FP) in fuel tank is faulty
 
Intake system has leaks (false air)
 
Secondary Air Injection (AIR) system has an improper seal
 
Intake Manifold Runner Position Sensor has failed
 
Motor for intake flap is faulty
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 

Trouble Code: P2188



System Too Rich at Idle Bank 1

Possible Causes:



Evaporative Emission (EVAP) canister purge regulator valve is faulty
 
Exhaust system components are damaged
 
Fuel injectors are faulty
 
Fuel pressure regulator and residual pressure have failed
 
Fuel Pump (FP) in fuel tank is faulty
 
Intake system has leaks (false air)
 
Secondary Air Injection (AIR) system has an improper seal
 
Intake Manifold Runner Position Sensor has failed
 
Motor for intake flap is faulty
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 

Trouble Code: P2189



System Too Lean at Idle Bank 2

Possible Causes:



Evaporative Emission (EVAP) canister purge regulator valve is faulty
 
Exhaust system components are damaged
 
Fuel injectors are faulty
 
Fuel pressure regulator and residual pressure have failed
 
Fuel Pump (FP) in fuel tank is faulty
 
Intake system has leaks (false air)
 
Secondary Air Injection (AIR) system has an improper seal
 
Intake Manifold Runner Position Sensor has failed
 
Motor for intake flap is faulty
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 

Trouble Code: P2190



System Too Rich at Idle Bank 2

Possible Causes:



Evaporative Emission (EVAP) canister purge regulator valve is faulty
 
Exhaust system components are damaged
 
Fuel injectors are faulty
 
Fuel pressure regulator and residual pressure have failed
 
Fuel Pump (FP) in fuel tank is faulty
 
Intake system has leaks (false air)
 
Secondary Air Injection (AIR) system has an improper seal
 
Intake Manifold Runner Position Sensor has failed
 
Motor for intake flap is faulty
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 

Trouble Code: P2191



System Too Lean at Higher Load Bank 1

Possible Causes:



Evaporative Emission (EVAP) canister purge regulator valve is faulty
 
Exhaust system components are damaged
 
Fuel injectors are faulty
 
Fuel pressure regulator and residual pressure have failed
 
Fuel Pump (FP) in fuel tank is faulty
 
Intake system has leaks (false air)
 
Secondary Air Injection (AIR) system has an improper seal
 
Intake Manifold Runner Position Sensor has failed
 
Motor for intake flap is faulty
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 

Trouble Code: P2192



System Too Rich at Higher Load Bank 1

Possible Causes:



Evaporative Emission (EVAP) canister purge regulator valve is faulty
 
Exhaust system components are damaged
 
Fuel injectors are faulty
 
Fuel pressure regulator and residual pressure have failed
 
Fuel Pump (FP) in fuel tank is faulty
 
Intake system has leaks (false air)
 
Secondary Air Injection (AIR) system has an improper seal
 
Intake Manifold Runner Position Sensor has failed
 
Motor for intake flap is faulty
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 

Trouble Code: P2193



System Too Lean at Higher Load Bank 2

Possible Causes:



Evaporative Emission (EVAP) canister purge regulator valve is faulty
 
Exhaust system components are damaged
 
Fuel injectors are faulty
 
Fuel pressure regulator and residual pressure have failed
 
Fuel Pump (FP) in fuel tank is faulty
 
Intake system has leaks (false air)
 
Secondary Air Injection (AIR) system has an improper seal
 
Intake Manifold Runner Position Sensor has failed
 
Motor for intake flap is faulty
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 

Trouble Code: P2194



System Too Rich at Higher Load Bank 2

Possible Causes:



Evaporative Emission (EVAP) canister purge regulator valve is faulty
 
Exhaust system components are damaged
 
Fuel injectors are faulty
 
Fuel pressure regulator and residual pressure have failed
 
Fuel Pump (FP) in fuel tank is faulty
 
Intake system has leaks (false air)
 
Secondary Air Injection (AIR) system has an improper seal
 
Intake Manifold Runner Position Sensor has failed
 
Motor for intake flap is faulty
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Check circuits for shorts to each other, ground or power
 

Trouble Code: P2195



O2 Sensor Signal Stuck Lean Bank 1 Sensor 1

Possible Causes:



Engine oil level high
 
Camshaft timing error
 
Cylinder compression low
 
Exhaust leaks in front of O2S
 
EGR valve is stuck open
 
EGR gasket is leaking
 
EVR diaphragm is leaking
 
Damaged fuel pressure regulator or extremely low fuel pressure
 
O2S circuit is open or shorted in the wiring harness
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Air leaks after the MAF sensor
 
PCV system leaks
 
Dip stick not seated properly
 

Trouble Code: P2196



O2 Sensor Signal Stuck Rich Bank 1 Sensor 1

Possible Causes:



Engine oil level high
 
Camshaft timing error
 
Cylinder compression low
 
Exhaust leaks in front of O2S
 
EGR valve is stuck open
 
EGR gasket is leaking
 
EVR diaphragm is leaking
 
Damaged fuel pressure regulator or extremely low fuel pressure
 
O2S circuit is open or shorted in the wiring harness
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Air leaks after the MAF sensor
 
PCV system leaks
 
Dip stick not seated properly
 

Trouble Code: P2197



O2 Sensor Signal Stuck Lean Bank 2 Sensor 1

Possible Causes:



Engine oil level high
 
Camshaft timing error
 
Cylinder compression low
 
Exhaust leaks in front of O2S
 
EGR valve is stuck open
 
EGR gasket is leaking
 
EVR diaphragm is leaking
 
Damaged fuel pressure regulator or extremely low fuel pressure
 
O2S circuit is open or shorted in the wiring harness
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Air leaks after the MAF sensor
 
PCV system leaks
 
Dip stick not seated properly
 

Trouble Code: P2198



O2 Sensor Signal Stuck Rich Bank 2 Sensor 1

Possible Causes:



Engine oil level high
 
Camshaft timing error
 
Cylinder compression low
 
Exhaust leaks in front of O2S
 
EGR valve is stuck open
 
EGR gasket is leaking
 
EVR diaphragm is leaking
 
Damaged fuel pressure regulator or extremely low fuel pressure
 
O2S circuit is open or shorted in the wiring harness
 
Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor (behind catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
Air leaks after the MAF sensor
 
PCV system leaks
 
Dip stick not seated properly
 

Trouble Code: P2227



Barometric Circuit Rationality Check

Possible Causes:



Sensor has deteriorated (response time too slow) or has failed
 
MAP sensor signal circuit is shorted to ground
 
MAP sensor circuit (5v) is open
 
MAP sensor is damaged or it has failed
 
BARO sensor signal circuit is shorted to ground
 
BARO sensor circuit (5v) is open
 
BARO sensor is damaged or it has failed
 
Replace the DME
 

Trouble Code: P2228



Barometric Circuit Low

Possible Causes:



Sensor has deteriorated (response time too slow) or has failed
 
MAP sensor signal circuit is shorted to ground
 
MAP sensor circuit (5v) is open
 
MAP sensor is damaged or it has failed
 
BARO sensor signal circuit is shorted to ground
 
BARO sensor circuit (5v) is open
 
BARO sensor is damaged or it has failed
 
Replace the DME
 

Trouble Code: P2229



Barometric Circuit High

Possible Causes:



Sensor has deteriorated (response time too slow) or has failed
 
MAP sensor signal circuit is shorted to ground
 
MAP sensor circuit (5v) is open
 
MAP sensor is damaged or it has failed
 
BARO sensor signal circuit is shorted to ground
 
BARO sensor circuit (5v) is open
 
BARO sensor is damaged or it has failed
 
Replace the DME
 

Trouble Code: P2231



O2 Sensor Signal Circuit Shorted to Heater Circuit Bank 1 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 

Trouble Code: P2234



O2 Sensor Signal Circuit Shorted to Heater Circuit Bank 2 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 

Trouble Code: P2237



O2S Sensor Positive Current Control Circuit/Open Circuit (Bank 1 Sensor 1)

Possible Causes:



Check plugs
 
Check wiring harness
 
Replace sensor
 

Trouble Code: P2240



O2S Sensor Positive Current Control Circuit/Open Circuit (Bank 2 Sensor 1)

Possible Causes:



Check plugs
 
Check wiring harness
 
Replace sensor
 

Trouble Code: P2243



O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 

Trouble Code: P2247



O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 

Trouble Code: P2251



O2 Sensor Negative Voltage Circuit/Open Bank 1 Sensor 1

Possible Causes:



Oxygen sensor (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (before catalytic converter) is faulty
 
Oxygen sensor heater (behind catalytic converter) is faulty
 
O2S circuit is open or shorted in the wiring harness
 

 
label.common.footer.alt.autozoneLogo