BMW Coupes and Sedans 1970-1988 Repair Guide

Actuator

Print

REMOVAL & INSTALLATION



  1. Turn the ignition switch to the OFF position.
  2.  
  3. Open the engine compartment and access the actuator at the intake manifold.
  4.  
  5. Disconnect the electrical connections from the actuator.
  6.  
  7. Disconnect the actuator cable from the throttle linkage and remove the nuts holding the actuator.
  8.  
  9. Install the actuator and connect the wiring and cable.
  10.  

 
label.common.footer.alt.autozoneLogo