BMW Coupes and Sedans 1970-1988 Repair Guide

Engine Oil Cooler

Print

REMOVAL & INSTALLATION



  1. Remove the radiator from the vehicle.
  2.  
  3. Disconnect the oil lines from the oil cooler.
  4.  
  5. Spread the clips on the cooler mount to remove. Unplug the temperature sensors and remove out to the left.
  6.  

To install:
  1. Install in reverse order. Tighten the fittings to 18-21 ft. lbs. (25-30 Nm). Check the engine oil level and fill if needed.
  2.  

 
label.common.footer.alt.autozoneLogo