BMW Coupes and Sedans 1970-1988 Repair Guide

Power Antenna Mast

Print

REMOVAL & INSTALLATION



  1. Turn the radio ON to extend the mast as far as it will go.
  2.  
  3. Remove the nut at the base of the mast. Pull the mast out of the antenna assembly. A firm pull may be necessary.
  4.  
  5. Install the new mast cable end into the opening and turn the radio OFF to draw the mast into the housing. Guide the mast and cable into the housing.
  6.  
  7. Install the nut and operate the antenna several times to check the operation.
  8.  

In the event the mast does not retract all the way down, repeat the process.

 
label.common.footer.alt.autozoneLogo