Removal & Installation
- Before servicing the vehicle, refer to the Precautions section.
Remove or disconnect the following:
Negative battery cable
- Clean all mating faces.
- Install new gaskets.
Position the rear exhaust manifold and front exhaust manifold and install new retaining nuts as follows:
- M6 nuts: 88 inch lbs. (10 Nm).
- M7 nuts: 15 ft. lbs. (20 Nm).
Install or connect the following:
O 2 s monitor sensors on exhaust pipes; torque to 37 ft. lbs. (50 Nm)