BMW X3 2005

Brake Caliper

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Wheel assembly
     

  4.  
  5. Apply the brake pedal slightly with a brake clamp.

    Slacken union nut
     
    Brake hose from the caliper fitting
     
    Connector for the wear indicator on the right side
     
    Caliper guide bolts and remove the brake caliper
     

  6.  

To install:

  1. Install or connect the following:

    Caliper and torque the guide bolts to 21 ft. lbs. (28 Nm)
     
    Brake hose to the brake pipe and torque to 14 ft. lbs. (19 Nm)
     
    Wear indicator
     

  2.  
  3. Remove the brake clamp.
  4.  
  5. Install the rear wheels.
  6.  
  7. Bleed the brakes.
  8.  

 
label.common.footer.alt.autozoneLogo