BMW X5 2000-05

Arming The System

Print

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Place the ignition switch in theOFF
  4.  
  5. Attach the sensors, the steering column connector and the seat belt tensioner connectors.
  6.  
  7. Connect the negative battery terminal.
  8.  
  9. Place the ignition switch in theON
  10.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Place the ignition switch in the OFF position.
  4.  
  5. Attach the sensors, the steering column connector and the seat belt tensioner connectors.
  6.  
  7. Connect the negative battery terminal.
  8.  
  9. Place the ignition switch in the ON position. Check that the SRS light illuminates for 6 seconds and extinguishes. If it illuminates in any other pattern, check the components and their connections for proper operation and recheck operation of the warning light.
  10.  

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Place the ignition switch in the OFF position.
  4.  
  5. Attach the sensors, the steering column connector and the seat belt tensioner connectors.
  6.  
  7. Connect the negative battery terminal.
  8.  
  9. Place the ignition switch in the ON position. Check that the SRS light illuminates for 6 seconds and extinguishes. If it illuminates in any other pattern, check the components and their connections for proper operation and recheck operation of the warning light.
  10.  

 
label.common.footer.alt.autozoneLogo