BMW X5 2000-05

Wheel Speed Sensors

Print

Removal & Installation



Front
  1. Raise and safely support the vehicle.
  2.  
  3. Remove the front wheel.
  4.  
  5. Open the connector housing, and pull the plug connector out of the bracket.
  6.  
  7. Disconnect the electrical connector.
  8.  
  9. Pull the cable with the rubber grommet out of the bracket on the spring strut.
  10.  
  11. Remove the cap screw and pull the cable out of the mounting on the spring strut.
  12.  
  13. Pull the wheel speed sensor out of the hole.
  14.  
  15. Installation is the reverse order removal.

    Click image to see an enlarged view

    Fig. Remove the cap screw (1) to access the wheel speed sensor-Front axle

  16.  

Rear
  1. Raise and safely support the vehicle.
  2.  
  3. Remove the rear wheel.
  4.  
  5. Pull the plug connection of the mounting and disconnect.
  6.  
  7. Pull the cable with the rubber grommets out of the brackets and open the cable ties.
  8.  
  9. Remove the cap screw and pull the wheel speed sensor out of the bore.
  10.  
  11. Installation is the reverse order of removal.

    Click image to see an enlarged view

    Fig. Remove the cap screw (1) to access the wheel speed sensor (2)-Rear axle

  12.  

 
label.common.footer.alt.autozoneLogo