BMW X5 2000-05

Blower Motor

Print

Removal & Installation



  1. Remove the center oddments tray below the center armrest by running two pieces of thin plastic along either side and pulling up on the tray.
  2.  
  3. Disconnect the electrical connector and unclip the cable.
  4.  
  5. Remove the mounting bolts.
  6.  
  7. Slide the rear compartment fan forward. Feed the out the air duct for the rear compartment, and lift out the rear blower.
  8.  
  9. Installation is the reverse order of removal. Snap the retaining lug on the underside of the rear compartment place into the mount.

    Click image to see an enlarged view

    Fig. Disconnect the electrical connector (1) and remove the mounting bolts (3) to remove the rear blower motor (4)

  10.  

 
label.common.footer.alt.autozoneLogo