BMW X5 2000-05

Master Cylinder

Print

Removal & Installation



  1. Remove the bulkhead cover.
  2.  
  3. Draw off the brake fluid from the clutch reservoir down to the supply hose.
  4.  
  5. Remove the supply hose from the expansion tank.
  6.  
  7. Remove the lower left trim panel from the instrument panel.
  8.  
  9. Pull off the retainer and disconnect the clutch master cylinder from the hydraulic line and remove with the supply hose.
  10.  
  11. Pry the switch module out of the master cylinder with a suitable pry tool.
  12.  
  13. Disconnect the electrical connector.
  14.  
  15. Remove the master cylinder.
  16.  
  17. Installation is the reverse order of removal.
  18.  
  19. Refill the clutch reservoir to the correct level.
  20.  

 
label.common.footer.alt.autozoneLogo