BMW X5 2000-05

Oil Pump

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Drain the engine oil.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Oil pan
     
    Oil pump sprocket wheel and chain
     
    Oil pump
     

  6.  

To install

  1. Check the seals on the oil pipes and replace it if necessary. Lubricate the seals with oil.
  2.  
  3. Check the seal in the oil pump and replace it if necessary. Screw the hexagon adapter back into the oil pump until it stops.
  4.  
  5. Install or connect the following:

    Oil pump. Torque the bolts to 17 ft. lbs. (22 Nm).
     
    Oil pump sprocket wheel and chain. Torque the nut to 35 ft. lbs. (47 Nm).
     
    Oil pan
     
    Negative battery cable
     

  6.  
  7. Fill the engine with clean oil.
  8.  
  9. Start the vehicle and check for leaks, repair if necessary.
  10.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Drain the engine oil.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Oil pan
     
    Oil pump sprocket wheel and chain
     
    Oil pump
     

  6.  

To install

  1. Check the seals on the oil pipes and replace it if necessary. Lubricate the seals with oil.
  2.  
  3. Check the seal in the oil pump and replace it if necessary. Screw the hexagon adapter back into the oil pump until it stops.
  4.  
  5. Install or connect the following:

    Oil pump. Torque the bolts to 17 ft. lbs. (22 Nm).
     
    Oil pump sprocket wheel and chain. Torque the nut to 35 ft. lbs. (47 Nm).
     
    Oil pan
     
    Negative battery cable
     

  6.  
  7. Fill the engine with clean oil.
  8.  
  9. Start the vehicle and check for leaks, repair if necessary.
  10.  

  1. Drain the engine oil.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Oil pan
     
    Oil pump sprocket wheel and chain
     
    Oil pump
     

  4.  

To install

  1. Check the seals on the oil pipes and replace it if necessary. Lubricate the seals with oil.
  2.  
  3. Check the seal in the oil pump and replace it if necessary. Screw the hexagon adapter back into the oil pump until it stops.
  4.  
  5. Install or connect the following:

    Oil pump. Torque the bolts to 17 ft. lbs. (22 Nm).
     
    Oil pump sprocket wheel and chain. Torque the nut to 35 ft. lbs. (47 Nm).
     
    Oil pan
     
    Negative battery cable
     

  6.  
  7. Fill the engine with clean oil.
  8.  
  9. Start the vehicle and check for leaks, repair if necessary.
  10.  

 
label.common.footer.alt.autozoneLogo