BMW X5 2000-05

Sunroof

Print

Power Sunroof



Removal & Installation
Motor
  1. Pry out the front ceiling light and disconnect the electrical connector.
  2.  
  3. Open the glasses compartment of the overhead console and remove the screws.
  4.  
  5. Lower the bracket, disconnect the wiring harnesses and remove the overhead panel, exposing the sunroof motor.
  6.  
  7. Remove the mounting bolts and lower the motor.
  8.  
  9. Disconnect the wiring harness and remove.
  10.  
  11. Installation is the reverse order of removal.
  12.  
  13. After the installation, the sunroof must be initialized as follows:
    1. Press and hold the switch in the "Lift" direction.
    2.  
    3. After reaching the lift end position, keep the switch pressed for approx. 20 more seconds.
    4.  
    5. Process is complete when the sunroof is raises up slightly and returns to the normal lift position.
    6.  

  14.  

Switch
  1. Pry out the front ceiling light and disconnect the electrical connector.
  2.  
  3. Reach in with your fingers and press out the switch for the sunroof.
  4.  
  5. Disconnect the wiring harness.
  6.  
  7. Installation is the reverse order of removal.
  8.  

 
label.common.footer.alt.autozoneLogo