BMW X5 2000-05

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions section.
  2.  
  3. Properly relieve the fuel system pressure.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Fuel pressure regulator and seal the fuel line before and after the filter with special tool 13-3-010
     
    Clips and fuel line from the filter
     
    Fuel filter
     

  6.  

To install:



New fuel filter
 
Fuel lines onto the correct fittings. Tighten the fuel line clamps until tight, but not to the point where the fuel lines become excessively pinched or damaged, then tighten the mounting bracket until snug.
 
Negative battery cable and cycle the ignitionONOFF
 

  1. Start the vehicle and check for leaks, repair if necessary.
  2.  

  1. Before servicing the vehicle, refer to the precautions in the beginning of this section.
  2.  
  3. Properly relieve the fuel system pressure.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Fuel pressure regulator and seal the fuel line before and after the filter with special tool 13-3-010
     
    Clips and fuel line from the filter
     
    Fuel filter
     

  6.  

To install:



New fuel filter
 
Fuel lines onto the correct fittings. Tighten the fuel line clamps until tight, but not to the point where the fuel lines become excessively pinched or damaged, then tighten the mounting bracket until snug.
 
Negative battery cable and cycle the ignition ON and OFF several times to build fuel pressure
 

  1. Start the vehicle and check for leaks, repair if necessary.
  2.  

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Properly relieve the fuel system pressure.
  4.  
  5. Remove or disconnect the following:

    Negative battery cable
     
    Fuel pressure regulator and seal the fuel line before and after the filter with special tool 13-3-010
     
    Clips and fuel line from the filter
     
    Fuel filter
     

  6.  

To install:



New fuel filter
 
Fuel lines onto the correct fittings. Tighten the fuel line clamps until tight, but not to the point where the fuel lines become excessively pinched or damaged, then tighten the mounting bracket until snug.
 
Negative battery cable and cycle the ignition ON and OFF several times to build fuel pressure
 

  1. Start the vehicle and check for leaks, repair if necessary.
  2.  

 
label.common.footer.alt.autozoneLogo