BMW X5 2000-05

Throttle Body

Print

Removal & Installation



3.0L Engine
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the air intake assembly.
  4.  
  5. Disconnect the resonance flap and idle speed control valve.
  6.  
  7. Disconnect the oil pressure and oil temperature switches.
  8.  
  9. Disconnect the tank venting valve.
  10.  
  11. Remove the mounting screws on the cable duct mounting.
  12.  
  13. Detach the throttle body electrical connector.
  14.  
  15. Remove the mounting bolts and remove the throttle body.

    Click image to see an enlarged view

    Fig. Remove the electrical connector (1) and mounting bolts (2) to remove the throttle body (3)-3.0L Engines

  16.  

To install:

  1. Replace the throttle body gasket and install the throttle body assembly.
  2.  
  3. The remainder of the installation is the reverse order of assembly.
  4.  

4.4L (M62) & 4.6L Engines
  1. Disconnect the negative battery cable.
  2.  
  3. Remove the air intake assembly.
  4.  
  5. Detach the throttle body electrical connector.
  6.  
  7. Remove the mounting bolts and remove the throttle body.

    Click image to see an enlarged view

    Fig. Remove the electrical connector (1) and mounting bolts (2) to remove the throttle body (3)-4.4L (M62) & 4.6L Engines

  8.  
  9. Installation is the reverse order of removal.
  10.  

 
label.common.footer.alt.autozoneLogo