BMW X5 2000-05

Coil Springs

Print

Removal & Installation



  1. Raise and safely support the vehicle.
  2.  
  3. Remove the rear wheel.
  4.  
  5. Remove the rear pulse generator from the wheel carrier.
  6.  
  7. Remove the shock absorber. For additional information, refer to the following topic: -Shock Absorber, Removal & Installation-.
  8.  
  9. Remove the brake caliper. For additional information, refer to the following topic: -Brake Caliper, Removal & Installation-.
  10.  
  11. Remove the guide arm from the wheel carrier.
  12.  
  13. Remove the control arm.
  14.  
  15. Disconnect the stabilizer link.
  16.  
  17. Disconnect the integral and swinging arm from the axle carrier.
  18.  
  19. Lower the wheel carrier, pull out the coil spring to the side.
  20.  
  21. Installation is the reverse order of removal.
  22.  
  23. After installation, the headlight adjustment must be checked.
  24.  

 
label.common.footer.alt.autozoneLogo