Bonneville, LeSabre, Park Avenue 2000-2005

Camshaft Position Sensor

Print

Removal & Installation



3.8L Engines
  1. Turn OFF the ignition.
  2.  
  3. Disconnect the electrical connector from the camshaft position sensor.
  4.  
  5. Remove the camshaft position sensor retaining screw.
  6.  
  7. Remove the camshaft position (CMP) sensor from the engine front cover.
  8.  

To install:

  1. Install the camshaft position sensor to the engine front cover.
  2.  
  3. Reinstall the camshaft position sensor retaining bolt.
  4.  
  5. Tighten the bolt to 44 inch lbs. (5 Nm).
  6.  
  7. Connect the camshaft position sensor electrical connector.
  8.  

  1. Remove the coolant recovery reservoir
  2.  
  3. Remove the drive belt.
  4.  
  5. Disconnect the electrical connector from the camshaft position sensor.
  6.  
  7. Remove the camshaft position sensor bolt.
  8.  
  9. Remove the camshaft position sensor from the engine front cover.
  10.  

To install:

  1. Install the camshaft position sensor to the engine front cover.
  2.  
  3. Install the camshaft position sensor bolt.
  4.  
  5. Tighten the bolt to 89 inch lbs. (10 Nm).
  6.  
  7. Connect the electrical connector to the camshaft position sensor. 
  8.  
  9. Install the drive belt.
  10.  
  11. Install the coolant recovery reservoir.
  12.  

 
label.common.footer.alt.autozoneLogo