Bonneville, LeSabre, Park Avenue 2000-2005

Multi-Function (Combination) Switch

Print

Removal & Installataion



  1. Disable the SIR system. Refer to the Chassis Electrical Section.
  2.  
  3. Remove the steering wheel.
  4.  
  5. Remove the tilt lever.
  6.  
  7. Remove the retaining screws from the lower steering column trim cover.
  8.  
  9. Remove the lower steering column trim cover.
  10.  
  11. Remove the retaining screw from the upper steering column trim cover.
  12.  
  13. Remove the upper steering column trim cover.
  14.  
  15. Remove the multifunction switch retaining screws.
  16.  
  17. Disconnect the multifunction switch electrical connections.
  18.  
  19. Remove the multifunction switch.
  20.  

To install:

  1. Install the multifunction switch.
  2.  
  3. Install the multifunction switch retaining screws. Tighten the side screw to 62 inch lbs. (7 Nm) and the top screw to 30 inch lbs. (3 Nm).
  4.  
  5. Route the electrical harness and connect electrical connections.
  6.  
  7. Install the upper steering column trim cover.
  8.  
  9. Install the retaining screw to the upper steering column trim cover.
  10.  
  11. Install the lower steering column trim cover.
  12.  
  13. Install the retaining screws to the lower steering column trim cover.
  14.  
  15. Install the steering wheel.
  16.  
  17. Install the tilt lever.
  18.  
  19. Enable the air bag system.
  20.  

 
label.common.footer.alt.autozoneLogo