Bonneville, LeSabre, Park Avenue 2000-2005

Wheel Bearings

Print

Removal & Installation



  1. Remove or disconnect the following:

    Wheel and the tire
     
    Brake caliper
     
    Brake rotor
     
    ABS sensor wire connector.

    Click image to see an enlarged view

    Fig. Exploded view of the rear hub/wheel bearing assembly

     
    Four bolts from the control arm
     
    Hub and bearing from the control arm
     
    Brake shield from the control arm
     

  2.  

To install:

  1. Clean the control arm face and the bore before installing the hub and the bearing.
  2.  
  3. Install or connect the following:

    Brake shield and the hub and the bearing to the control arm with the four bolts. Reconnect the ABS sensor. Tighten the hub and bearing bolts to 52 ft. lbs. (70 Nm).
     
    Brake rotor
     
    Brake caliper
     
    Wheel and the tire
     

  4.  

 
label.common.footer.alt.autozoneLogo