Breeze, Cirrus, Sebring Convertible and Sedan, Stratus Sedan, 1999-2005

Slave (Actuator) Cylinder

Print

Removal & Installation



  1. Drain the clutch fluid


  2.  
  3. Remove clutch master cylinder cap
  4.  
  5. Attach a hose to the slave cylinder bleed screw and insert the hose into a clean container
  6.  
  7. Loosen the bleed screw
  8.  
  9. Clutch tube connection using a flare wrench
  10.  
  11. Clutch tube
  12.  
  13. Clutch release cylinder from transaxle
  14.  

To install:

  1. Install the release cylinder to the transaxle and torque the bolts to 14 ft. lbs. (19 Nm)
  2.  
  3. Attach the clutch tube connection using a flare wrench
  4.  
  5. Refill the clutch fluid and bleed.
  6.  

 
label.common.footer.alt.autozoneLogo