Breeze, Cirrus, Sebring Convertible and Sedan, Stratus Sedan, 1999-2005

Turn Signal Switch

Print

Should any function of the switch fail, the entire switch assembly must be replaced.

Click image to see an enlarged view

Fig. Components of the combination switch

  1. Set the steering wheel and the front wheels to the straight ahead position.
    CAUTION
    The Supplemental Inflatable Restraint (SIR) system must be disarmed before working around the steering column. Failure to do so may cause accidental deployment of the air bags, resulting in unnecessary SIR system repairs and/or personal injury.

  2.  
  3. Disarm the air bag system, refer to the Air Bag section of this manual.
  4.  
  5. Remove the steering column lower cover retaining screws.
  6.  
  7. Loosen the lower section of the instrument cluster hood for clearance, as necessary.
  8.  
  9. Remove the steering column upper cover.

    Click image to see an enlarged view

    Fig. Remove the combination switch mounting screws

  10.  
  11. Remove the combination switch mounting screws.
  12.  
  13. Unfasten the switch-s wiring connectors.
  14.  
  15. Lift the switch upward to remove.
    NOTE
    The turn signal flasher and hazard warning flasher are combined into one unit called a combination flasher (combo-flasher). An inoperative or incomplete turn signal circuit will result in an increase in flasher speed. The flasher, which is serviced separately from the switch, is mounted to the back of the multi-function (combination) switch. The flasher is black in color for ease of identification.

  16.  

To install:

  1. Install the combination switch.
  2.  
  3. Attach the wiring connectors.
  4.  
  5. Install the combination switch mounting screws and tighten to 20 inch lbs. (2.3 Nm).
  6.  
  7. Install the steering column covers as follows:
    1. Install the upper cover onto the steering column.
    2.  
    3. Tighten the lower part of the instrument cluster hood.
    4.  
    5. Install the lower steering column cover retaining screws and tighten to 17 inch lbs. (2 Nm).
    6.  

  8.  
  9. Arm the air bag system, refer to the Air Bag section of this manual.
  10.  
  11. Test the switch functions.
  12.  

 
label.common.footer.alt.autozoneLogo