Ford Taurus/Sable 1986-1995 Repair Information
Throttle Position (TP) Sensor
REMOVAL & INSTALLATION
Disconnect the negative battery cable.
Disconnect the Throttle Position (TP) sensor from the wiring harness.
Scribe a reference mark across the edge of the sensor where it meets the throttle body to ensure correct position during installation.
Unfasten the retaining screws, then remove the TP sensor.
Position the TP sensor according to the marks made during removal, then install the retaining screws. Tighten the the screws to 11-16 inch lbs. (1.2-1.8 Nm).
Connect the negative battery cable.