CR-V 2007-2008

Testing

Print

Specific to:

Honda CR-V 2007-2008

  1. Connect the Honda Diagnostics System (HDS), or equivalent scan tool, to the Data Link Connector (DLC) located under the driver's side of the dashboard.
  2.  
  3. Turn the ignition switch ON .
  4.  
  5. Check the ECT SENSOR in the DATA LIST.
  6.  
  7. Start the engine and allow it to come to operating temperature.
  8.  
  9. If the voltage is not within specification, inspect the connectors and wiring harness.
  10.  
  11. If no faults are found, replace the sensor.
  12.  

 
label.common.footer.alt.autozoneLogo