CR-V 2007-2008

Removal & Installation

Print

Specific to:

Honda CR-V 2007-2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the fuel tank unit. Refer to Fuel Pump, removal & installation.
  4.  
  5. Remove the fuel level sensor (fuel sending unit) (A) from the fuel tank unit (B).
  6.  

To install:

  1. When connecting the wire harness, make sure the connection is secure and the connector (C) is firmly locked into place.
  2.  
  3. When installing the fuel gauge sending unit, make sure the connection is secure and the connector is firmly locked into place. Be careful not to bend or twist it excessively.
  4.  
  5. Install the parts in the reverse order of removal.
  6.  
  7. Install the fuel tank unit. Refer to Fuel Pump, removal & installation.

    Click image to see an enlarged view

    Fig. Exploded view of fuel pump and fuel level sending unit

  8.  

 
label.common.footer.alt.autozoneLogo