CR-V 2007-2008

Pinion Seal

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Driveshaft
     
    Companion flange
     
    Pinion seal
     

  4.  

To install:


NOTE
Use a new locknut and O-ring for assembly.

  1. Install the pinion seal. Drive the seal square into the bore.
  2.  
  3. Install the companion flange. Tighten the locknut to 87 ft. lbs. (118 Nm).
  4.  
  5. Install the driveshaft. Tighten the flange bolts to 24 ft. lbs. (32 Nm).

    Click image to see an enlarged view

    Fig. Exploded view of the rear differential pinion components-CR-V

  6.  

 
label.common.footer.alt.autozoneLogo