CTS 2003-2005

Removal & Installation

Print

  1. Remove the instrument panel carrier.
  2.  
  3. Disconnect the mode actuator electrical connector.
  4.  
  5. Remove the mode actuator screws.
  6.  
  7. Remove the mode actuator.
  8.  

To install:

  1. Install the mode actuator.
  2.  
  3. Install the mode actuator screws.
  4.  
  5. Connect the electrical connector to the actuator.
  6.  
  7. Install the instrument panel carrier.
  8.  

 
label.common.footer.alt.autozoneLogo