CTS 2003-2005

Removal & Installation

Print

Left Side



  1. Remove the left closeout panel.
  2.  
  3. Disconnect the left air temperature actuator electrical connector from the actuator.
  4.  
  5. Remove the left air temperature actuator screws.
  6.  
  7. Remove the left air temperature actuator.
  8.  

To install:

  1. Install the left air temperature actuator.
  2.  
  3. Install the left air temperature actuator screws.
  4.  
  5. Connect the left air temperature actuator electrical connector to the actuator.
  6.  
  7. Install the left closeout panel.
  8.  

Right Side



  1. Remove the air inlet assembly.
  2.  
  3. Remove the right air temperature actuator screws.
  4.  
  5. Remove the right air temperature actuator.
  6.  
  7. Disconnect the right air temperature actuator electrical connector.
  8.  

To install:

  1. Connect the right air temperature actuator electrical connector.
  2.  
  3. Install the right air temperature actuator.
  4.  
  5. Install the right air temperature actuator screws 
  6.  
  7. Install the air inlet assembly.
  8.  

 
label.common.footer.alt.autozoneLogo