CTS 2003-2005

Removal & Installation

Print

  1. Remove the air inlet assembly.
  2.  
  3. Disconnect the electrical connector from the recirculation actuator.
  4.  
  5. Remove the recirculation actuator screws.
  6.  
  7. Remove the recirculation actuator.
  8.  

To install:

  1. Install the recirculation actuator.
  2.  
  3. Install the recirculation actuator screws.
  4.  
  5. Connect the electrical connector to the recirculation actuator.
  6.  
  7. Install the air inlet assembly.
  8.  

 
label.common.footer.alt.autozoneLogo