CTS 2006-2007, CTS-V 2005-2007, DTS 2006-2007

Wheel Speed Sensor Rings (Toothed Rings)

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Turn OFF the ignition.
  4.  
  5. Remove the wheel speed sensor. Refer to speed sensor removal.
  6.  
  7. Remove and discard the wheel speed sensor reluctor ring (1).
    NOTE
    Do not reuse the wheel speed sensor reluctor after it has been removed.



    Click image to see an enlarged view

    Fig. View of speed sensor reluctor ring (1)

  8.  

To install:

  1. Apply Loctite® to the inner portion of the wheel speed sensor reluctor.
  2.  
  3. Insert the wheel speed sensor reluctor onto the hub assembly.
  4.  
  5. Install the ring part of the J 44253 installation tool onto the wheel speed sensor reluctor.
  6.  
  7. Insert the turning part of the J 44253 tool (1).
  8.  
  9. Carefully turn the J 44253 (1) to thread the wheel speed sensor reluctor.

    Click image to see an enlarged view

    Fig. Installation of the reluctor with the J 44253 tool (1)

  10.  
  11. Install the wheel speed sensor.
  12.  

 
label.common.footer.alt.autozoneLogo