CTS 2006-2007, CTS-V 2005-2007, DTS 2006-2007

Blower Motor

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the floor console.
  4.  
  5. Disconnect the auxiliary blower assembly electrical connectors.
  6.  
  7. Remove the 3 auxiliary temperature actuator screws.
  8.  
  9. Remove the auxiliary temperature actuator.
  10.  
  11. Remove the 3 auxiliary blower motor assembly screws.
  12.  
  13. Remove the blower motor assembly.
  14.  
  15. Remove the 3 auxiliary blower motor screws.
  16.  
  17. Remove the auxiliary blower motor.
  18.  
  19. Remove the auxiliary temperature actuator mode cam screw.
  20.  
  21. Remove the auxiliary temperature actuator mode cam.
  22.  
  23. Remove the 2 auxiliary temperature actuator mode cam Levers
  24.  
  25. Remove the left and right blower housing.
  26.  
  27. Remove the blower housing temperature door.

    Click image to see an enlarged view

    Fig. Location and removal of auxiliary blower motor

  28.  

To install:

  1. Install the blower housing temperature door.
  2.  
  3. Install the left and right blower housing.
  4.  
  5. Install the 2 auxiliary temperature actuator mode cam Levers
  6.  
  7. Install the auxiliary temperature actuator mode cam.
  8.  
  9. Install the auxiliary temperature actuator mode cam screw. Tighten to 9 inch lbs. (1 Nm).
  10.  
  11. Install the auxiliary blower motor.
  12.  
  13. Install the 3 auxiliary blower motor screws. Tighten to 9 inch lbs. (1 Nm).
  14.  
  15. Install the blower motor assembly.
  16.  
  17. Install the 3 auxiliary blower motor assembly screws. Tighten to 9 inch lbs. (1 Nm).
  18.  
  19. Install the auxiliary temperature actuator.
  20.  
  21. Install the 3 auxiliary temperature actuator screws. Tighten to 9 inch lbs. (1 Nm).
  22.  
  23. Reconnect the auxiliary blower assembly electrical connectors.
  24.  
  25. Install the floor console.
  26.  

 
label.common.footer.alt.autozoneLogo