CTS 2006-2007, CTS-V 2005-2007, DTS 2006-2007

Removal & Installation

Print

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the right closeout insulator panel.
  4.  
  5. Remove the glove box.
  6.  
  7. Disconnect the blower motor electrical connector.
  8.  
  9. Disconnect the blower motor processor electrical connector.
  10.  
  11. Remove the screws that retain the blower motor.
  12.  
  13. Remove the air inlet housing bolts to gain clearance for the blower motor.
  14.  
  15. Remove the blower motor.
  16.  

To Install:

  1. Install the blower motor.
  2.  
  3. Install the blower motor screws and tighten to 13 inch lbs. (1.5 Nm).
  4.  
  5. Install the air inlet housing bolts and tighten to 53 ft. lbs. (6 Nm).
  6.  
  7. Connect the blower motor processor electrical connector.
  8.  
  9. Connect the blower motor electrical connector.
  10.  
  11. Install the glove box.
  12.  
  13. Install the right closeout insulator panel.
  14.  

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the right hand closeout insulator panel.
  4.  
  5. Disconnect the blower motor electrical connector.
  6.  
  7. Remove the 3 screws that retain the blower motor.
  8.  
  9. Remove the blower motor.

    Click image to see an enlarged view

    Fig. Blower motor location and removal view

  10.  

To install:

  1. Install the blower motor.
  2.  
  3. Install the 3 blower motor screws and tighten to 9 inch lbs. (1 Nm).
  4.  
  5. Connect the blower motor electrical connector.
  6.  
  7. Install the right closeout insulator panel.
  8.  

 
label.common.footer.alt.autozoneLogo