CTS 2006-2007, CTS-V 2005-2007, DTS 2006-2007

Driven Disc & Pressure Plate

Print

Adjustments



The hydraulic clutch system requires no adjustments.

Removal & Installation



CTS
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Transmission from the vehicle
     
    Clutch pressure plate
     
    Clutch driven plate
     

  4.  

To install:

  1. Install or connect the following:

    Clutch driven plate
     
    Clutch pressure plate. Tighten the bolts in a star pattern and in several passes to 21 ft. lbs. (28 Nm).
     
    Transmission to the vehicle
     
    Negative battery cable

    Click image to see an enlarged view

    Fig. Clutch tightening sequence

     

  2.  

CTS-V
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Negative battery cable
     
    Transmission from the vehicle
     
    Concentric slave cylinder
     
    Clutch housing
     
    Clutch pressure plate
     
    Clutch driven plate
     

  4.  

To install:

  1. Install or connect the following:

    Clutch driven plate
     
    Clutch pressure plate. Tighten the clutch pressure plate bolts in sequence evenly over 3 increments with the fourth increment to 52 ft. lbs. (70 Nm).

    Click image to see an enlarged view

    Fig. Tighten clutch pressure plate bolts in the sequence shown

     
    Clutch housing. Tighten the bolts to 37 ft. lbs. (50 Nm).
     
    Concentric slave cylinder
     
    Transmission to the vehicle
     
    Negative battery cable
     

  2.  

 
label.common.footer.alt.autozoneLogo