CTS 2006-2007, CTS-V 2005-2007, DTS 2006-2007

Slave (Actuator) Cylinder

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the transmission. Refer to Transmission Replacement.
  4.  
  5. Remove the concentric actuator cylinder quick connect bolt (5), (Slave Cylinder).
  6.  
  7. Remove the 3 concentric actuator cylinder bolts (1).
  8.  
  9. Remove the concentric actuator cylinder (2).
  10.  
  11. Remove the O-ring (3).
  12.  

To install:

Click image to see an enlarged view

Fig. Slave cylinder removal shown

  1. Install the O-ring (3).
  2.  
  3. Install the concentric actuator cylinder (2).
  4.  
  5. Install the 3 concentric actuator cylinder bolts (1) and the quick connect bolt (5).
  6.  
  7. Tighten the 3 concentric actuator cylinder bolts to 15 ft. lbs. (20 Nm).
  8.  
  9. Tighten the quick connect bolt to 89 inch. (10 Nm).
  10.  
  11. Install the transmission.
  12.  

 
label.common.footer.alt.autozoneLogo