CTS 2006-2007, CTS-V 2005-2007, DTS 2006-2007

Camshaft Intermediate Drive Shaft

Print

Removal & Installation



4.6L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the camshaft intermediate drive shaft sprocket.
  4.  
  5. Remove the camshaft intermediate drive shaft retaining bolts.
  6.  
  7. Remove the camshaft intermediate drive shaft from the engine.
  8.  
  9. Clean and inspect the camshaft intermediate driveshaft.

    Click image to see an enlarged view

    Fig. Camshaft intermediate driveshaft removal

  10.  

To install:

  1. Position the camshaft intermediate drive shaft to the engine, aligning the bolt holes.
  2.  
  3. Install the camshaft intermediate drive shaft retaining bolts.
  4.  
  5. Tighten the camshaft intermediate drive shaft retaining bolts to 11 ft. lbs. (15 Nm). 
  6.  
  7. Install the camshaft intermediate drive shaft sprocket.
  8.  

 
label.common.footer.alt.autozoneLogo