CTS 2006-2007, CTS-V 2005-2007, DTS 2006-2007

Testing

Print

  1. Ignition OFF, disconnect the harness connector at the fuel level sensor.
  2.  
  3. While sweeping the fuel level sensor through its full range of motion, test for a minimum value of less than 41 ohms and a maximum value greater than 119 ohms of resistance between signal terminal A and the low reference terminal D.
  4.  
  5. If not within the specified range, replace the fuel level sensor.
  6.  

 
label.common.footer.alt.autozoneLogo