CTS 2006-2007, CTS-V 2005-2007, DTS 2006-2007

Output Shaft Seal

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Raise and suitably support the vehicle.
  4.  
  5. Remove the appropriate rear tire and wheel assembly.
  6.  
  7. Remove the appropriate wheel drive shaft.
  8.  
  9. Using a flat bladed tool remove the differential output shaft seal.
    NOTE
    Take care not to damage any sealing surfaces.

  10.  

To install:

  1. Lubricate the wheel drive shaft sealing surface of the oil seal with 75W90 synthetic axle lubricant, GM P/N  12378261 (Canadian P/N 10953455) or equivalent.
  2.  
  3. Install the differential output shaft seal (2) to the J 45017.

    Click image to see an enlarged view

    Fig. Using the J 45017 (1), to install the differential output shaft seal (2).

  4.  
  5. Using the J 45017 (1), install the differential output shaft seal (2).
  6.  
  7. Remove J 45017  (1) from the differential output shaft seal (2).
  8.  
  9. Install the wheel drive shaft.
  10.  
  11. Inspect the fluid level.
  12.  
  13. Install the rear tire and wheel assembly.
  14.  
  15. Lower the vehicle.
  16.  

 
label.common.footer.alt.autozoneLogo