Caliber 2007

Oil Pressure Sensor

Print

Removal & Installation



  1. Raise vehicle.
  2.  
  3. Disconnect electrical connector.
  4.  
  5. Remove oil pressure sensor using oil pressure socket C-4597 (1) and discard sensor.
  6.  

To install:


NOTE
If the oil pressure sensor is removed, it must be replaced with a new sensor.


CAUTION
The oil pressure sensor has tapered threads, over tightening could crack the engine block.

  1. Install oil pressure sensor using oil pressure socket C-4597 and tighten to 71 inch lbs. (8 Nm).
  2.  
  3. Connect electrical connector.
  4.  

 
label.common.footer.alt.autozoneLogo