Camaro, Firebird, 1999 - 2002

Front Crankshaft Seal

Print

Removal & Installation



3.8L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect battery negative cable from battery and properly isolate to prevent accidental reconnection.
  4.  
  5. Remove the crankshaft balancer.
  6.  
  7. Use a screwdriver to pry out the crankshaft front oil seal. Use care in order to avoid damage to the seal bore or seal contact surfaces.
  8.  

To install:

  1. Install the crankshaft front oil seal. Use special tool J 35354 or a suitable seal installer.
  2.  
  3. Install the crankshaft balancer.
  4.  
  5. Reconnect negative battery cable.
  6.  

5.7L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect battery negative cable from battery and properly isolate to prevent accidental reconnection.
  4.  
  5. Remove the crankshaft balancer.
  6.  
  7. Use a screwdriver to pry out the crankshaft front oil seal. Use care in order to avoid damage to the seal bore or seal contact surfaces.
  8.  

To install:

  1. Install the crankshaft front oil seal. Use special tool J 35354 or a suitable seal installer.
  2.  
  3. Install the crankshaft balancer.
  4.  
  5. Reconnect negative battery cable.
  6.  

 
label.common.footer.alt.autozoneLogo