Camaro, Firebird, 1999 - 2002

Blower Motor

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect battery negative cable from battery and properly isolate to prevent accidental reconnection.
  4.  
  5. Remove the right instrument panel insulator.
  6.  
  7. Disconnect the blower motor electrical connector.
  8.  
  9. Remove the blower motor bolts and blower motor.

    Click image to see an enlarged view

    Fig. Blower location and mounting.

  10.  

To install:

  1. Install the blower motor. Guide the blower motor into position. Do not catch the blower motor fan on the protruding parts.
  2.  
  3. Install the blower motor bolts and tighten to 20 inch lbs. (2.3 Nm)
  4.  
  5. Connect the blower motor electrical connector.
  6.  
  7. Install the right instrument panel insulator.
  8.  
  9. Reconnect negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo