Camaro, Firebird, 1999 - 2002

Steering Wheel

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Disconnect battery negative cable from battery and properly isolate to prevent accidental reconnection.
  4.  
  5. Remove or disconnect the following:

    Airbag module from the steering wheel
     
    Steering wheel retaining nut
     
    Horn ground lead
     

  6.  
  7. Remove the steering wheel with a suitable puller.
  8.  
  9. Remove the steering wheel horn switch.

    Click image to see an enlarged view

    Fig. Steering wheel removal-detail view

  10.  

To install:

  1. Route the SIR coil electrical connector to the steering wheel.
  2.  
  3. Install the steering wheel horn switch.
  4.  
  5. Install the steering wheel and tighten the nut to 32 ft. lbs. (43 Nm)
  6.  
  7. Connect the horn ground lead
  8.  
  9. Install the SIR module to the steering wheel.
  10.  
  11. Reconnect negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo