Camaro, Firebird, 1999 - 2002

Wheel Hub & Bearings

Print

Adjustment



The front wheel bearing assembly used on these vehicles is a sealed, non-serviceable unit. No wheel bearing adjustments (front or rear) are necessary or possible.

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Front wheel
     
    Brake caliper
     
    Brake rotor
     
    Wheel speed sensor electrical connector
     
    Hub bolts
     
    Hub/bearing assembly by pulling it from the spindle

    Click image to see an enlarged view

    Fig. Exploded view of the wheel hub/bearing unit mounting

     

  4.  

To install:

  1. Install or connect the following:
    WARNING
    Be sure the wheel speed sensor electrical connector is reattached to the sensor wire bracket and sensor or the wires could be damaged.



    Hub/bearing assembly on the spindle. Torque the bolts to 63 ft. lbs. (86 Nm).
     
    Wheel speed sensor electrical connector
     



    Brake rotor
     
    Brake caliper
     
    Front wheel
     

  2.  

 
label.common.footer.alt.autozoneLogo