- Before servicing the vehicle, refer to the Precautions Section.
- Check that the ignition switch is OFF .
Check that the battery negative (-) terminal is disconnected.
CAUTIONAfter removing the terminal, wait for at least 90 seconds before starting the operation.
Rotate the spiral cable counterclockwise slowly by hand until it feels firm.
Rotate the spiral cable clockwise approximately 2.5 turns to align the marks.
NOTEDo not turn the spiral cable by the airbag wire harness.
NOTEThe spiral cable will rotate approximately 2.5 turns to both the left and right from the center.