Camry 2007

Removal & Installation

Print

  1. Drain and recycle the engine coolant.
  2.  
  3. Disconnect the negative battery cable.
  4.  
  5. Remove instrument panel.
  6.  
  7. For TMC made:
    1. Disconnect the connector.
    2.  
    3. Remove the 2 screws and blower assembly.
    4.  
    5. Remove the 3 screws and blower with fan motor sub-assembly.

      Click image to see an enlarged view

      Fig. Disconnecting the connector and removing the 2 screws-TMC

    6.  

  8.  
  9. For TMMK made:
    1. Remove cooler expansion valve.
    2.  
    3. Remove the connector and clamp, and disconnect the wire harness.
    4.  
    5. Remove the 6 screws and then the blower assembly with the cooler evaporator sub-assembly.
    6.  
    7. Remove the 3 screws and blower with fan motor sub-assembly.

      Click image to see an enlarged view

      Fig. Removing the connector, clamp and wire harness-TMMK



      Click image to see an enlarged view

      Fig. Removing the 6 screws and blower assembly-TMMK

    8.  

  10.  
  11. To install, reverse removal procedure.
  12.  

 
label.common.footer.alt.autozoneLogo